RICH PRINCEMEDIA Start a project
Production craft

Colour grading explained: what happens in the suite and why it takes time

Colour is not a filter. What a colourist actually does, shot by shot, why log footage looks flat, and how to give notes that help the grade.

Rich Prince Media · · 4 min read

Near the end of a project, clients hear that the edit is locked and the film is "going to colour". Then a few days pass, and they wonder what could possibly take so long. The footage is already shot. Isn't colour just a filter?

It is not, and the gap between a filter and a proper grade shows in almost every frame. Here is what actually happens in the colour suite, and why it deserves the time.

Correction first, then grading

Colour work happens in two broad stages.

Colour correction is technical. The colourist makes every shot accurate and consistent. White balance is corrected so whites are white. Exposure is balanced. Skin tones are made natural. Shots from different cameras, different angles and different times of day are matched so they cut together without jumping.

Colour grading is creative. Once the footage is consistent, the colourist builds the look: the mood, the contrast, the palette, the feel the treatment described back in pre-production. Warm and nostalgic. Cool and clinical. Rich and saturated. Muted and restrained. This is where a film starts to feel finished.

Why footage arrives looking flat

Footage straight from a cinema camera can look grey and washed out. That is intentional. Cameras like the ARRI ALEXA can record in a log format or in raw, capturing a wide range of brightness and colour information without baking in a look. It is a bit like a photographer shooting raw instead of JPEG.

That flat image holds far more detail in the highlights and shadows than a finished one. The colourist's job is to decide what to do with all that information. Usually it starts with a transform into the display standard, often using a LUT (a lookup table that translates the camera's colour into a standard viewing space), and the real work begins from there.

What happens in the session

A grade is usually several passes over the whole timeline:

  1. Balancing. Shot by shot, every clip is brought to a neutral, consistent starting point.
  2. Setting the look. A few key shots are graded until the look is right, often with the director in the room. That look is then carried across the scenes.
  3. Shot matching. Each shot is refined so it sits with its neighbours. A face should not change colour when the camera angle changes.
  4. Secondary corrections. Targeted adjustments: brightening eyes, calming a distracting background, shifting one colour without touching the others, taming a hot spot on a forehead.
  5. Tracking and masks. Shapes are drawn around faces or objects and tracked through moving shots, so a correction follows the subject.
  6. Review and revisions. The client watches, notes come back, and the grade is refined.
  7. Deliverables. Final versions are rendered for each platform and format, then checked.

Multiply steps three to five across hundreds of shots and the hours add up quickly. A commercial may only run thirty seconds, but it can contain dozens of cuts, each needing individual attention.

Why it takes time

Some honest reasons:

  • Every shot is different. Light shifts between takes, clouds pass, cameras vary. Matching is detailed work.
  • Skin is hard. Faces are where viewers notice problems first. Getting skin tones right across different complexions and lighting is careful, unglamorous work.
  • Taste needs distance. A grade that looks great at the end of a long day can look heavy the next morning. Good colourists build in time to see the work with fresh eyes.
  • Screens differ. We grade on calibrated monitors in a controlled room, then check how the result reads on the phones and laptops where most people will watch.
  • Rendering takes time. High-resolution, high-quality deliverables in several formats do not render instantly.

What the grade cannot do

Colour grading is powerful, but it is not magic. It cannot add light where there was none, sharpen something out of focus, or fully recover highlights that were badly overexposed. It works best when the footage was lit and exposed well in the first place. That is why the director, the director of photography and the colourist agree on the look early, in pre-production, and why lighting on set matters so much.

How to give useful colour notes

Clients often feel unsure how to comment on a grade. A few tips:

  • Describe the feeling you want, not the technique. "Warmer and more intimate" is more useful than "add orange".
  • Point to specific shots with timecodes.
  • Watch on the kind of screen your audience will use, but trust the calibrated review if the two disagree slightly.
  • Bring references, ideally the ones from the original treatment.
  • Mention skin tones directly if something looks off. That is always a priority fix.

Why it is worth it

A good grade makes a project feel coherent and intentional. It ties scenes together, directs the eye, and gives a brand or an artist a consistent visual identity across a campaign. For an artist like Gem Shadou, whose visuals are built around gold-toned styling, a consistent palette is part of what makes the work recognisable from one post to the next.

Colour grading is one part of our post-production service, alongside editing, sound and motion graphics. If you want to understand what your project will need in the suite, or you have footage that needs finishing, let's talk.

Planning a production?

Send us a short brief. We reply within one business day with a plan and a quote.

Call WhatsApp Book